Next Generation Compound Firework - Pink

Next Generation Compound Firework.

The compound is made up of two fireworks secured to a board and pre-fused. You should only need to light this firework once to enjoy the full display.

Once you have received your firework, please remove the lid to familiarise yourself with the firework before setting it up to fire.

We advise you to leave the firework in the base of the box as it will provide additional support to the fireworks, ensuring they do not fall over.

The firework has two fuses, one on each firework.

The fuse on the small firework marked as firework number 1 in this picture is the initial fuse and is the only one you should need to light.

On the large firework marked number 2, you will find a big yellow label asking you to ensure the arrow on the yellow label is pointing towards the spectators who are watching the firework.

This ensures that the spectators will have the best viewing position when the firework fires the fanned effects.

Remember, the safety distance for this firework is a minimum of 25M.

You will find the RESERVE fuse on firework number 2, which is the largest firework in the box.

You do NOT need to use this fuse unless there has been an issue, and the firework did not fire all the shots or the link between the first firework and second firework fails.

If, for any reason, you do need to use the reserve fuse:

• Ensure you wait 30 minutes before returning to the firework.
• Approach the firework from the back of the firework where the reserve fuse is located. Never approach a fanned effect firework from either side as you will be walking into the firing line.
• Once you have exposed the reserve fuse, light with an extended arm, ensuring all other body parts are away from the firework.
• Never lean over the firework or have any part of your body over the tubes at any time.